0Items
  • Please contact us for more discounts

  • Discount code (please send email for inquiry)

  • Promotion Time (Coming soon!)

  • day ::

What is the principle of radio shielding?

4g wireless signal jammer is generally composed of power supply, electronic scanning control unit, segmented radio frequency module unit, amplifier unit, transmitting antenna unit and other parts. After the signal generator generates the scanning signal, it goes through the inverter, enters the oscillator and modulates it to the mobile communication working frequency band, and then is amplified by the power amplifier and the voltage regulator tube controls the power. The amplified frequency scanning signal is transmitted into the air in the form of radio waves.
The working principle of mobile communication is that within a certain frequency range, wireless devices (mobile phones, etc.) and base stations communicate through radio waves to complete data and sound transmission with a certain baud rate and modulation method. When the mobile phone communicates, it contacts the base station through the uplink frequency, and then transfers the signal to the mobile service switching center to realize the call. In the standby state, the mobile phone communicates with the base station through the broadcast control channel. Once there is a need for a call, the mobile phone will first be allocated to the mobile phone business channel according to the specific conditions of the channel near the terminal through the request, so that the mobile phone will jump to the business channel to realize the call and data transmission. . At the same time, wireless communication must ensure sufficient signal-to-noise ratio to effectively receive and complete the communication.

radio shield

According to the above working principle, the signal shield is generally composed of a power supply, an electronic scanning control unit, a segmented radio frequency module unit, an amplifier unit, and a transmitting antenna unit. After the signal generator generates the scanning signal, it goes through the inverter, enters the oscillator and modulates it to the mobile communication working frequency band, and then is amplified by the power amplifier and the voltage regulator tube controls the power. The amplified frequency scanning signal is transmitted into the air in the form of radio waves. Because the frequency sweep signal forms garbled interference in the message signal received by the mobile phone (increase the ratio of the noise signal to the device threshold), the mobile phone cannot receive the normal data sent by the base station, so that the mobile phone cannot establish a normal connection with the base station, so that the mobile phone is disconnected. Base station communication network. The mobile phone shows the phenomenon that the search network has no signal, no service system, etc., to achieve the blocking effect.

 

The wireless signal jammer causes garbled interference in the received message signal of the mobile phone due to the frequency sweep signal (increase the ratio of the noise signal to the device threshold), the mobile phone cannot receive the normal 4G data sent by the base station, so that the mobile phone cannot establish a normal connection with the base station. , so that the mobile phone is disconnected from the base station communication network. The mobile phone shows the phenomenon that the search network has no signal, no service system, etc., to achieve the blocking effect.


Post time: 09-23-2022