Please contact us for more discounts
Discount code (please send email for inquiry)
Promotion Time (Coming soon!)
This portable high power drone signal jammer EST-1001, can interfere all the satellite positioning signals, including GPS / Beidou / Glonass / Galileo, and shield the ISM 2.4G and ISM 5.8G frequency bands commonly used by drones / UAV like DJI and others brands with more than 1500 meters blocking radius. To jam the signals for UAV when flying or aerial, to cut off the signals between UAV and remote controller, to make the drones landing or return in right places, or hover, to avoid any accidents caused by UAV.
* available TX frequency
CH1: GPS L1: 1560-1620MHz (Output Power: 10W)
CH2: 2.4G Wi-Fi: 2400-2500MHz (Output Power: 10W)
CH3: 5.8G Wi-Fi: 5725-5850MHz (Output Power: 10W)
*Antenna: 3 built-in high gain omni-directional antennas
*Jamming Radius: Radius 200-1500 M 【covering the entire low open area】
The jamming radius still depends on the strength signal in given area
*Safety Regulation: AC Adapter UL (E190582) / CSA (LR112971 Level 3)
*Jamming Type: sweep jamming
*Single Output Power: ≥+40dBm / +10W (±200mW)
*Total Output Power: ≥30W
*Working Power Input: AC 110V 60Hz ~ AC 240V 50Hz / DC 27V 5000mAh built-in Li-ion battery
*Operation Method: one hand or two hands to operate the shooting
*Control Mode: 3 buttons control the 3 bands, can turn on/off each channel separately
*Trigger Lifetime: more than 100,000 times
*Dimension: 650(L)×95(W)×330(H)mm (not including antennas)
*Net Weight: 3.7kg
*Temperature of Working Environment: -10 ℃ / +55 ℃
*Temperature of Storage Environment: -20 ℃ / +60 ℃
*composition: interception system host, charging power.
*portable design: imitation light weapons design, one hand or both hands gun shooting.
*regulatory model: in situ landing or returning to takeoff point.
*the best remote control distance: 1500 meters (covering the entire low open area).
*built-in high-capacity lighting, infrared laser, thermal imaging, night vision and other equipment to enhance performance after installation of rails.
*objective: remote control, GPS, GLONASS and 2.4G, 5.8G communication equipment.
*open the package, take out the drone jammer and its accessories carefully to avoid any damage.
**interfere with the remote control and image transmission signal, and turn on the 2.4G and 5.8G corresponding switches at the same time, pull down the trigger and hold it, make a sound of didi, start to transmit the signal, and aim at the drone.
*interfere with satellites, remote control, and image transmission signals, turn on the GPS, 2.4G, and 5.8G corresponding switches at the same time, pull down the trigger and hold it, make a sound of didi, and aim at the drone.
*after use, turn off the GPS, 2.4G, 5.8G corresponding switches to prevent mis-operation from pulling the trigger; and turn off the battery voltage display switch also.
*charging: open the waterproof and dust-proof plug of the charging stand at the bottom of the battery compartment, and insert the charger plug into the charging port at the bottom of the battery compartment. The charger indicator light is red, indicating that it is charging; the charging is complete (or the charger is not plugged in) indicator light is on Green light.
*check the battery voltage: turn on the switch on the battery to display the battery voltage instantly; when the battery voltage is lower than 22V, even charging.
Suitable to be used in military forces, anti-terror units, bomb squads, VIP protection, convoys protection, SWAT teams, anti-drug units, riot-control units, embassies protection, roadblock protection, checkpoint protection, government compounds, homeland security, correctional centers, petrochemical industry, sport venues, theaters, and such kind of sensitive locations.
1pc x drone jammer main unit
1pc x charging cable
1pc x user manual (optional)
The following is the process you should take to complete your order through bank to bank transfer:
1. Please go to your bank (through online banking, ATM or going into a branch) and complete the transfer of money. Make sure that the amount you transfer is the exact total of your order. Payment details below:
- If your bank is located in Austria, Germany, Spain, France, United Kingdom, Italy, Netherlands, Belgium, Finland, Greece or Luxemburg you will pay to our WorldPay bank. You will see the bank details once you have placed the order.
PLEASE NOTE: If you are paying to our WorldPay bank you MUST include the Unique Payment Reference Number (you will receive this directly after paying the order) in the description section when completing payment to help us identify your order. Failure to do this will result in an unsuccessful transaction.
- If your bank is located in a country not listed above you will pay to our HSBC account. The details are below:
PLEASE NOTE: If you are paying in this way you MUST write your Yourname order number in the description section when paying so we can easily recognize your payment. Failure to do this will result in a delayed or failed transaction.
2. When this is done, log in to your Yourname ‘My Account’ and complete the following:
Click ‘Order list’
Click ‘Complete Payment’ and fill in the related information for verification (This is an important step. If the information you have filled in does not match your bank details the payment can not be completed.)
Click ‘Submit’ to finish the procedure.
3. You will receive a payment confirmation email from us after your order’s payment has gone through successfully. If you do not receive this email, please contact us here: http://www.Yourname.com/help/
Please note that Yourname will begin to handle your items after payment has been cleared.
The tailoring and handling time is the number of business days we will take to process your items before shipping them. This processing includes order verification, item manufacturing, quality checking and packaging. This does not include the shipping time.
Different items and categories have different tailoring and handling times. However, on each item page the information is displayed next to the item photo as shown in the picture below.