Please Login or Register
Please contact us for more discounts
Discount code (please send email for inquiry)
Promotion Time (Coming soon!)
This high power portable manpack jammer EST-BP30, implementing the most effective and reliable RF jamming technology and equipped with a fully-integrated broadband jamming system. This backpack jammer is highly portable and light weight. It plays an important role to use the heavily loaded vehicle and trolley-type devices in some extreme hard situation. The operator can carry it forward through the hills and muddy road, as well as climbing steep mounts and stairs avoid casualties and improve the combat efficiency. It can jam 5-80 meters radius range, to make the mobile phone or other kinds of devices can't work and get the wireless signal, but it does not interfere with other electronic equipment. Its overall RF output power is more than 55W, developed specially for personnel and other sensitive facilities, such as military installations, and government compounds.
* available TX frequency, or can be customized
CH1: GSM: 800-900MHz (40dBm / 10W)
CH2: PCS/PHS: 1900-2000MHz (40dBm / 10W)
CH3: GSM / 4G LTE: 1700-1800MHz (37dBm / 5W)
CH4: 3G UMTS: 2100-2200MHz (40dBm / 10W)
CH5: 4G: 700-800MHz (37dBm / 5W)
CH6: 4G WiMAX: 2496-2690MHz (37dBm / 5W)
CH7: VHF: 135-175MHz (37dBm / 5W)
CH8: UHF: 400-470MHz (37dBm / 5W)
*Antenna: 8 external high gain omni-directional antennas
*Jamming Radius: Radius 5-80 M 【the signals must ≤-85dBm in the location】
The jamming radius still depends on the strength signal in given area
*Safety Regulation: AC Adapter UL (E190582) / CSA (LR112971 Level 3)
*Jamming Type: sweep jamming
*Single Output Power: ≥+37-40dBm / +5-10W
*Total Output Power: ≥55W
*Working Power Input: AC 110V 60Hz ~ AC 240V 50Hz, available for DC 24V 20AH built-in Li-ion battery (support 1.5-2.5 hours continuously working), and DC 12V car charger plug in
*Control: wireless remote control (turn on and turn off)
*Dimension: 550(L)×150(W)×350(H)mm (not including antennas)
*Antennas Dimension: omni antenna Dia 20mm x Height 60mm (3-5dBi) x 8pcs
*Full Set Weight: 16.48kg
*Antenna Gain: ≥3dBi
*Working Temperature: -30℃ to +60℃
*Relative humidity: ≤85%(RH) (please keep the machine dry)
*Air pressure: 86~106kPa
*Available system: Include analog (AMPS,TACS,NMT) and digital (GPRS,GSM,3G,DCS,CDMA, PDC,TDMA,PHS,PCS,IDEN,W-CDMA,UMTS, Wi-Fi / Blue Tooth/wireless video,4G)
*manual switch, with simple ON/OFF wireless remote control, easy to switch on/off of the jammer.
*backpack designed for portability and easy moving.
*ultra-wide band jamming coverage, effectively shielding 2G/3G/4G and VHF, UHF.
*efficient frequency division ensures the best interference effect on signals of different frequencies.
*efficient power distribution minimizes power loss and improves efficiency.
*support 3 kinds of power supply in AC110-220V / built-in high capacity Li-ion battery / DC 12V car charger.
*built-in efficient cooling fan and cooling fin ensures the product work stably in a long service life.
*the mobile phone signal jammer is made up of up-to-date paste components and integrated circuits. with advanced performance, it is easy to install and use, and can work continuously for a long time.
*open the package, take out the jammer and its accessories carefully to avoid any damage.
*screw the antennas to the correct position on the jammer as the number indicated.
*hang the jammer onto the wall with hanging height for 1.5-2 meters, choose a best place where its 5 fans (2 fans in right side, 2 fans in left side, 1 big fan in back side) with good cooling condition, do not shield and affect the fan space.
*it has totally 3 different kinds of working ways:
if you want to work with 110V AC power, insert the AC plug into the socket, connect to jammer, and then turn on the Toggle Switch at position #2, when the power indicator is lit, it means that the jammer starts working.
if you want to work with battery, turn on the Toggle Switch at position #3, when the power indicator is lit, it means that the jammer starts working.
if you want to work with 12V DC power, insert the car charger into the socket, connect to jammer, and then turn on the Toggle Switch at position #4, when the power indicator is lit, it means that the jammer starts working.
if you want to turn off the jammer, switch the Toggle Switch to the position #1, the power indicator unlit, it means the jammer is off, not working.
*the wireless remote control can only work for turn and turn off the jammer with 5-20meters distance, A for turn on, B for turn off.
*the installation location in the space of different sizes can be decided according to the following fig. Ex1: indoor small space (less than 200 square meter)
EX2: indoor big space (more than 200 square meter, preferably by the cellular mode) EX3: outdoor big space (more than 1000 square meter, preferably by the cellular mode)
*since the valid scope covered by the jammer is a round area with the isolator as the center, put the jammer in the center place where it installed to get the best performance.
*please keep away strong electromagnetic sources with heat sources to ensure high isolation affect and stable operation for a long time.
*switch off the device in time when not using it, lest the normal operation of mobile phones be affected.
*while using the isolator outdoors, be sure to keep it away from water or damp.
*keep away from caustic gases and liquids, and be sure to make it dust-proof and moisture-proof, lest the aging of the components inside should be accelerated.
The mobile phone signal jammer will make effect only on the communication of mobile phones, instead of on other electronic devices and human bodies, thus can be used widely.
*conference room, auditoriums, law court, library, exam room, school, cinema, theater, and hopital etc.
*Oil station, gas filled station, oil field, oil depot etc.
*at places where using mobile phones is prohibited such as government, military, finance, security, police and command center etc.
1pc x jammer main unit
1set x antennas (8pcs omni antennas)
1pc x AC power cable
1pc x battery charger
1pc x car charger
1pc x wireless remote control
1pc x backpack bag
1pc x user manual (optional)
The following is the process you should take to complete your order through bank to bank transfer:
1. Please go to your bank (through online banking, ATM or going into a branch) and complete the transfer of money. Make sure that the amount you transfer is the exact total of your order. Payment details below:
- If your bank is located in Austria, Germany, Spain, France, United Kingdom, Italy, Netherlands, Belgium, Finland, Greece or Luxemburg you will pay to our WorldPay bank. You will see the bank details once you have placed the order.
PLEASE NOTE: If you are paying to our WorldPay bank you MUST include the Unique Payment Reference Number (you will receive this directly after paying the order) in the description section when completing payment to help us identify your order. Failure to do this will result in an unsuccessful transaction.
- If your bank is located in a country not listed above you will pay to our HSBC account. The details are below:
PLEASE NOTE: If you are paying in this way you MUST write your Yourname order number in the description section when paying so we can easily recognize your payment. Failure to do this will result in a delayed or failed transaction.
2. When this is done, log in to your Yourname ‘My Account’ and complete the following:
Click ‘Order list’
Click ‘Complete Payment’ and fill in the related information for verification (This is an important step. If the information you have filled in does not match your bank details the payment can not be completed.)
Click ‘Submit’ to finish the procedure.
3. You will receive a payment confirmation email from us after your order’s payment has gone through successfully. If you do not receive this email, please contact us here: http://www.Yourname.com/help/
Please note that Yourname will begin to handle your items after payment has been cleared.
The tailoring and handling time is the number of business days we will take to process your items before shipping them. This processing includes order verification, item manufacturing, quality checking and packaging. This does not include the shipping time.
Different items and categories have different tailoring and handling times. However, on each item page the information is displayed next to the item photo as shown in the picture below.