The portable base station based on the centerless self-organizing network technology can be automatically connected to the wireless network when it is turned on. The whole network uses the same frequency point and does not rely on any public or private network for ultra-long-distance communication. It can create flexible, mobile, and robust, A non-centered self-organizing network communication system with high confidentiality.
The centerless self-organizing network communication technology innovatively realizes the characteristics of multi-hop and multi-level relay, same-frequency simulcast networking, and signal overlap and combination. It perfectly realizes the non-centered self-organizing communication network and solves the multi-point simulcasting. Communication problems caused by signal interference in retransmission and overlapping areas. The performance indicators of this technology have reached the standards of the US military.
• Ultra-long communication distance
The extremely low signal-to-noise ratio threshold (1dBm) and extremely high receiving sensitivity (-125dBm) enable the single-hop distance to exceed 1.5 times that of intercom devices with the same power on the market. The single jump distance in the ground visibility environment can reach 15-20 kilometers, and the single jump distance from high point to low point can reach 50-80 kilometers.
• No GPS timing required
Multiple base stations do not need GPS time service, and they can form a single frequency network with the same frequency when they are turned on. It is especially suitable for solving network communication problems in large buildings, tunnels and mines and other non-open-air environments.
• Flexible non-centered Ad Hoc network
The device comes with the same frequency relay function, which supports up to 8 hops of communication transmission, and extends the communication distance by 5 to 10 times. It can be networked with multiple base stations, and can also cooperate with the microsite communication self-organizing intercom group network. The networking mode is flexible, and the leaving or joining of any node does not affect the communication of the entire network.
• Secure encrypted communication
Unique communication mechanism, with AES256 encryption method and tens of thousands of block codes, realizes super encrypted communication.
• IP67 protection level
Supports IP67 protection level to ensure normal use in harsh outdoor environments.
Technical Parameter
Walkie Talkie
Dimension | 125 * 54 * 35mm(not including antennas) | Relay Networking | 8-hop center-less Ad Hoc network |
Weight | 320g (including battery) | Network Node | unlimited number |
Battery Voltage | 7.4V | Support Frequency | 350-470MHz |
Working Time | 24 hours (15% Transmit) | Channel Capacity | 1024 |
Channel Spacing | 12.5KHz | Communication Encryption | AES256 |
Transmit Power | 2W | Protection Level | IP67 |
Sensitivity | -125dBm | Working Temperature | -30℃ ~ +75℃ |
Base Station
Dimension | 200 * 166 * 70mm(not including antennas) | Relay Networking | 8-hop center-less Ad Hoc network |
Weight | 2.6 kg (including battery) | Network Node | unlimited number |
Battery Voltage | 14.8V | Support Frequency | 350-470MHz |
Working Time | 48 hours (15% Transmit) | Channel Capacity | 1024 |
Channel Spacing | 12.5KHz | Communication Encryption | AES256 |
Transmit Power | 20W | Protection Level | IP67 |
Sensitivity | -125dBm | Working Temperature | -30℃ ~ +75℃ |
Application Area
Fire rescue, emergency communications, public security police, armed police forces, property security, rail transit, marine vessels, petroleum and petrochemicals, electric energy, forestry scenic spots, mine caves, scientific expeditions, etc.
Application Mode
No central ad hoc network, any change in the network topology will not affect the coverage, and no interference in the overlapped coverage area of the base stations. The base station and walkie-talkie can be combined arbitrarily, without relying on timing, and Ad Hoc networks can be realized without base stations. Any node leaving or joining does not affect the communication of the entire network, and the network can be built after power-on, without waiting for the Ad Hoc network to converge.
The following is the process you should take to complete your order through bank to bank transfer:
1. Please go to your bank (through online banking, ATM or going into a branch) and complete the transfer of money. Make sure that the amount you transfer is the exact total of your order. Payment details below:
- If your bank is located in Austria, Germany, Spain, France, United Kingdom, Italy, Netherlands, Belgium, Finland, Greece or Luxemburg you will pay to our WorldPay bank. You will see the bank details once you have placed the order.
PLEASE NOTE: If you are paying to our WorldPay bank you MUST include the Unique Payment Reference Number (you will receive this directly after paying the order) in the description section when completing payment to help us identify your order. Failure to do this will result in an unsuccessful transaction.
- If your bank is located in a country not listed above you will pay to our HSBC account. The details are below:
Bank Account:
Bank Code:
Beneficiary:
Bank Name:
Bank Address:
SWIFT Code:
PLEASE NOTE: If you are paying in this way you MUST write your Yourname order number in the description section when paying so we can easily recognize your payment. Failure to do this will result in a delayed or failed transaction.
2. When this is done, log in to your Yourname ‘My Account’ and complete the following:
Click ‘Order list’
Click ‘Pay’
Click ‘Complete Payment’ and fill in the related information for verification (This is an important step. If the information you have filled in does not match your bank details the payment can not be completed.)
Click ‘Submit’ to finish the procedure.
3. You will receive a payment confirmation email from us after your order’s payment has gone through successfully. If you do not receive this email, please contact us here: http://www.Yourname.com/help/
Please note that Yourname will begin to handle your items after payment has been cleared.
The tailoring and handling time is the number of business days we will take to process your items before shipping them. This processing includes order verification, item manufacturing, quality checking and packaging. This does not include the shipping time.
Different items and categories have different tailoring and handling times. However, on each item page the information is displayed next to the item photo as shown in the picture below.